|
|
Post by mooretoolsplease on Mar 11, 2008 15:48:59 GMT
Hi all,
I'm after a couple of spindle moulder blocks to be made,
I've called whitehill but they have a 6 week turn around currently.
I'm after 2 rebate blocks, one that is 101mm in diameter, and another that is 105mm in diameter, both of which are 25mm tall.
They are going to be used in conjunction with a 125mm rebate block to give me a double rebate, only one at a time though.
Any ideas who else can make these for me?
thanks
Matt
|
|
|
|
Post by andy on Mar 11, 2008 15:58:16 GMT
|
|
|
|
Post by jfc on Mar 11, 2008 16:04:23 GMT
NLS 01992710888 probably have them done for you in a few days . Also maybe cutting solutions can help ?
|
|
|
|
Post by mooretoolsplease on Mar 11, 2008 16:09:02 GMT
I did wonder about cutting solutions Jas, going to PM him about it
|
|
|
|
Post by cuttingsolutions on Mar 11, 2008 17:06:03 GMT
Hi Matt
you ask for rebate blocks which are both specials.
I will assume you want disposable knife heads.
do you need the scribing knives (14x14x2) on both sides of the head?
25 mm makes it a special knife, which becomes more expensive. could you use a 30 mm wide head?
i can probably deliver in about three weeks.
Dave
|
|
|
|
Post by mooretoolsplease on Mar 11, 2008 18:06:39 GMT
Thanks for the reply Dave, I should have been a bit more detailed in my email, yes to disposable blades and the scribing cutters, only on the top though. It needs to be 25mm as this is the important measurement for the window that gets fitted into the frame.   Thats the profile I am making,I've sourced the tenoning cutters from NLS. I've also sourced the 12mm radius cutter for the ovolo. The sequence of cutters will be 12mm radius, spacer, 25mm tall rebate block, then standard rebate block. The 2 different diameters will be for either a 12/4 rebate combination or 10/6 rebate combination. The other block I'm after is a 7 degree sloping cill block, preferably 4 cutters with 2 adjustable radius cutters for the edge of the cill, 150mm tall and 100mm diameter at the widest point. Thanks Matt |
|
|
|
Post by jfc on Mar 11, 2008 18:50:41 GMT
I take it adjustable groovers dont have the diameter ?
|
|
|
|
Post by mooretoolsplease on Mar 11, 2008 20:16:26 GMT
The diameter for most of those are too big, I wanna be able to make the whole profile in one pass through the new moulder.
Matt
|
|
