|
|
Post by 9fingers on Oct 31, 2007 16:30:17 GMT
Hi All, As a newbie round here I've been posting about a couple of projects I've been working on. I'm curious that one had been read quite a few times but not a single reply. and yet another received several responses trevera25.proboards85.com/index.cgi?board=projects&action=display&thread=1193600682Is of no interest? Is it too trivial? Is it because I mentioned Norm? Does it contain no useful information? etc etc Please be brutally frank (or Joe or Tom?) as I'd like to be able to gauge what sort of postings would interest people and not bother with those that would not. Bob |
|
|
|
Post by Lord Nibbo on Oct 31, 2007 16:37:10 GMT
Got to admit I didn't notice the post, but you done a nice job and the calender adds a touch of perfection too. ;D
|
|
|
|
Post by paulchapman on Oct 31, 2007 16:52:42 GMT
Hi Bob, Although I didn't comment, I thought it was an interesting post and that you had made a good job of the infeed/outfeed table. I have a mitre saw and, on the few occasions I use it, I curse the fact that I haven't a similar table  Keep posting that type of stuff - it is interesting. Is that really your missus  ;D Cheers  Paul |
|
|
|
Post by timberman on Oct 31, 2007 16:59:54 GMT
Hi All, As a newbie round here I've been posting about a couple of projects I've been working on. I'm curious that one had been read quite a few times but not a single reply. and yet another received several responses Bob Perhaps that says it all really, you've answered your own question ;D |
|
|
|
Post by mailee on Oct 31, 2007 18:11:24 GMT
Yes I too read it Bob even though I didn't comment on it. I do like the look of it and was impressed by the one Norm made too. Unfortunitely for me I just haven't got the room for something like it. I wold like to put one on a portable table like Norm's but still need to store it away somewhere. As you can see I am lacking in space.  Must be all those machines I got.  |
|
|
|
Post by Scrit on Oct 31, 2007 18:36:20 GMT
Hi Bob
I'm another one who read but didn't post. I'm currently on an install where we're doing hundreds of mitre joints (I've done about 30 today) so I'm well aware of the need for longer support. Comments posted!
Scrit
|
|
|
|
Post by dom on Oct 31, 2007 18:45:04 GMT
Hi Bob, don't be offended, sometimes a picture says it all and doesn't require comment.
Dom
|
|
|
|
Post by Alf on Oct 31, 2007 18:47:39 GMT
Sorry, Bob, trying to keep my post count down.
<thinks>
Bugger.
|
|
|
|
Post by evergreen on Oct 31, 2007 18:58:23 GMT
9fingers
I remember your workshop from Another Forum. The infeed/outfeed table looks pretty good too but I guessed from your post that there was to be a final instalment when your mitre saw was properly mounted and so I was withholding any comment until that was done. In truth, your whole workshop makes me green with envy!
Regards.
|
|
Keep posting that type of stuff - it is interesting.
;D
Must be all those machines I got. 
