|
|
Post by colincott on Nov 6, 2007 21:45:57 GMT
Slow down people ;D I have just finished to knobs that Houtslager wanted made and as there is not much turning. I thought I would post some pic's on them being made. I hope you like  You to Karl   |
|
|
|
Post by colincott on Nov 6, 2007 21:46:36 GMT
|
|
|
|
Post by colincott on Nov 6, 2007 21:48:20 GMT
|
|
|
|
Post by colincott on Nov 6, 2007 21:48:57 GMT
|
|
|
|
Post by colincott on Nov 6, 2007 21:50:41 GMT
Thery are as close as I could get them as I dont do turning all the time but it did help doing the bit for JFC   |
|
|
|
Post by paulchapman on Nov 6, 2007 22:00:30 GMT
Very nice, Colin. You make it look easy  - but I bet it's not. Cheers Paul |
|
|
|
Post by colincott on Nov 6, 2007 22:15:55 GMT
Very nice, Colin. You make it look easy - but I bet it's not. Cheers Paul Paul I dont think it is as hard as some think it is as I have had no lessons myself, just watched pro's at the wood work shows and a few books, plus lots of mistakes. I started most of my turning on one of the Wolfcraft lathes. Now I come to think of it some of the things I did on it  ( 3' bed post for my bed ). I still make mistakes but not as many now and no big ones on these ;D I turned all the wood in to knobs |
|
|
|
Post by paulchapman on Nov 6, 2007 22:51:50 GMT
|
|
|
|
Post by engineerone on Nov 7, 2007 0:33:58 GMT
you could always try a pole lathe paul |
|
|
|
Post by colincott on Nov 7, 2007 0:58:49 GMT
;D Paul Good luck trying to get that one pass her and you could at least hook it up to a bike Wicked sod If you are not on here for a while, I will guess she has seen this post  |
|
- but I bet it's not.
( 3' bed post for my bed ).
