|
|
Post by paulchapman on Jun 25, 2008 11:49:55 GMT
When I was at the West Dean hand tool event, Deneb Puchalske of Lie Nielsen Toolworks gave a demonstration of using a toothed blade in a bench plane for fast stock removal without tear-out. These toothed blades are available for Lie Nielsen bevel up planes but there didn't appear to be any available for bevel down planes. Well, I've just found some  Dick Tools in Germany do them www.dick-gmbh.de/DwEn/Kunz_Blades.htmMight give them a try....... Cheers  Paul |
|
|
|
Post by wizer on Jun 29, 2008 16:06:58 GMT
How would you sharpen it?
|
|
|
|
Post by paulchapman on Jun 29, 2008 16:13:24 GMT
Just on the bevel, non-grooved side Cheers Paul |
|
|
|
Post by jaco on Jun 30, 2008 16:23:39 GMT
When I was at the West Dean hand tool event, Deneb Puchalske of Lie Nielsen Toolworks gave a demonstration of using a toothed blade in a bench plane for fast stock removal without tear-out. These toothed blades are available for Lie Nielsen bevel up planes but there didn't appear to be any available for bevel down planes. Well, I've just found some Dick Tools in Germany do them www.dick-gmbh.de/DwEn/Kunz_Blades.htmMight give them a try....... Cheers Paul
;D ;D ;D ;DThanks Paul, the info is welcome |
|
|
|
Post by paulchapman on Jun 30, 2008 16:55:01 GMT
Ahhhhhhhhhhhhhhhh, all this name and event dropping ..............
;D ;D ;D ;D Well, no point hob-nobbing with these people and not letting you know, Jaco. Mind you, I don't tell them that I know you....... ;D Cheers Paul |
|
Dick Tools in Germany do them www.dick-gmbh.de/DwEn/Kunz_Blades.htm
