|
|
Post by dom on Feb 7, 2008 18:21:54 GMT
Not woodworking but related.
I'm looking for 150 eye bolts.
The bolt is M4 the eye is 10mm diameter. From the centre of the eye to the base of the bolt is 20mm
They do exist I have one
I believe I've looked in most places, Hafele etc.
Any ideas please.
P.S. I really don't want to cut 150 long bolts down
|
|
Stree
Junior Member
Posts: 98
|
Post by Stree on Feb 7, 2008 18:53:23 GMT
Try RS components. no link handy but should google easily enough
|
|
|
|
Post by dom on Feb 7, 2008 19:19:55 GMT
Thanks but already tried
Also no joy with Maplins, Orbital, Tektrix, Farneel, Impact.......
|
|
|
|
Post by engineerone on Feb 7, 2008 19:25:41 GMT
dom, try clerkenwell screws, either in "clerkenwell" or ealing, well actually acton, along the high road. otherwise have you tried pipeworks?? paul  |
|
|
|
Post by dom on Feb 7, 2008 19:32:28 GMT
Thanks Paul, that was my first port of call tomorrow as they don't have a web site. They don't do mail order so I'd have to drive in which I was trying to avoid. Just being lazy I guess |
|
Stree
Junior Member
Posts: 98
|
Post by Stree on Feb 7, 2008 19:33:27 GMT
|
|
|
|
Post by engineerone on Feb 7, 2008 19:35:19 GMT
that looks a good place, you could always ring clerkenwell dom ;D other thought is to ring paddington springs, since eye bolts are generally used there. they are in wembley these days go figure  paul |
|
|
|
Post by dom on Feb 7, 2008 19:38:38 GMT
Close but no cigar Stree ;D
|
|
|
|
Post by andy on Feb 7, 2008 19:39:37 GMT
Give Roy a ring
Surrey Fasteners Ltd
Surrey House Course Road
Ascot
SL5 7HQ (Road Map)
Berkshire
Tel: 01344 627892
|
|
|
|
Post by dom on Feb 7, 2008 19:41:21 GMT
Ta Andy, will try Roy.
|
|
rich
New Member
Posts: 31
|
Post by rich on Feb 7, 2008 19:59:59 GMT
Dom, Iv'e found that chandlery shops are good places to get eyebolts from.
Rich.
|
|
|
|
Post by dom on Feb 7, 2008 20:10:59 GMT
Did try one Rich but nothing that small, I'll ask Jason.
Cheers
|
|
|
|
Post by engineerone on Feb 7, 2008 20:31:08 GMT
are you saying jason is that small ;D paul |
|
Stree
Junior Member
Posts: 98
|
Post by Stree on Feb 7, 2008 20:34:16 GMT
Dom,
Just a quick question whilst your attention is on this thread if I may ! ( saves me making a new thread for a one line answer )
Triton TRA001. Table mounting. What threads are the baseplates machine screws? So I can find some..
In return I will continue on the quest for the holy grai.................I mean eyebolts....
|
|
|
|
Post by andy on Feb 7, 2008 20:40:02 GMT
Dom, Just a quick question whilst your attention is on this thread if I may ! ( saves me making a new thread for a one line answer ) Triton TRA001. Table mounting. What threads are the baseplates machine screws? So I can find some.. In return I will continue on the quest for the holy grai.................I mean eyebolts.... Screws to mount Triton to router table is.... 1/4" UNC ps how long do you need them? |
|
Stree
Junior Member
Posts: 98
|
Post by Stree on Feb 7, 2008 20:45:45 GMT
I was hoping to keep them quite while actually.........
Well you did ask.
Over length is OK I can cut them down.... I use countersunk allan keyed ones on the Elu table plate, will I need same profile for the Trirton?
( Still looking for eyebolts Dom, its not a hijack !)
|
|
|
|
Post by andy on Feb 7, 2008 20:47:53 GMT
4 off I assume
Pm me your address and I will lend you some ;D
|
|
Stree
Junior Member
Posts: 98
|
Post by Stree on Feb 7, 2008 20:55:08 GMT
Thanks Andy, PM sent..............
Eyebolts eyebolts, must find the eyebolts....
|
|
Stree
Junior Member
Posts: 98
|
Post by Stree on Feb 7, 2008 20:58:01 GMT
|
|
Stree
Junior Member
Posts: 98
|
Post by Stree on Feb 7, 2008 21:13:18 GMT
and here is a list of companies that deal in eyebolts................http://www.hotfroguk.co.uk/Products/eye-bolts
|
|
|
|
Post by 9fingers on Feb 7, 2008 21:23:51 GMT
Try here Dom www1.uk.conrad.com and search for eye bolt I can't paste a direct link due to the way their site works. They have M4 x 25 and M4 x 15 but don't say where the length is measured from. HTH Bob |
|
|
|
Post by dom on Feb 8, 2008 6:59:08 GMT
STREE.......... come back from your quest, it's over ;D
Thank you all for your efforts
The cigar goes to Bob(9fingers)
Thanks Bob
In answer to your question eye bolts are measured from the centre of the eye
Brilliant, thanks again
Dom
|
|
Stree
Junior Member
Posts: 98
|
Post by Stree on Feb 8, 2008 9:02:54 GMT
Well done Bob!
Now, about nosebolts.......
|
|
|
|
Post by andy on Feb 8, 2008 10:24:22 GMT
Now, about nosebolts....... ;D ps screws in the post mate |
|
Stree
Junior Member
Posts: 98
|
Post by Stree on Feb 9, 2008 14:58:53 GMT
Andy,
1/"4 UNC x4 arrived this AM, thanks ever so much for that, I really appreciate it !
Chris
|
|
